Watch below to see how to install a film shield on their vintage Polaroid box-type camera:
Tools needed:
- Screwdriver
- Polaroid film shield
- Polaroid box-type camera
Installation Instructions:
With the film door open, locate the tabs (usually they are black) and use a flathead screwdriver to push them out. Next, remove the front panel and align the film shield in a way that it unrolls as shown in the video, such that it would cover an exiting photo. Lastly, snap it back onto the front camera. Be extra careful not to snap the plastic tabs on the front panel!
The film shield is now installed on your camera.