Inserting a new film pack into the Polaroid Go camera couldn't be simpler. Check the video and learn it step by step!
1) Turn on the Polaroid Go camera. Your film counter should read "0" in the camera's LED display, showing there are no photos remaining.
2) Slide the film door's button over, releasing the film door. Open the film door all the way.
3) Match the arrows on the new film cartridge with the arrows inside the camera's film compartment. You may need to guide the top part of the cartridge (closest to the arrows) in first and then allow the bottom half of the cartridge to settle in.
4) Close the camera's film door until you hear a click of the door latching in place. This will cause the darkslide (black protective slide covering the new film pack) to eject automatically under the camera's film shield. Gently lift the film shield and remove the darkslide, which can be discarded.
You are now ready to take your first photo with the Polaroid Go!
Still need help? Contact our customer service and we can figure it out with you using this form.